  
|
|
Magnetic Couplings
& Clutches
|
 |
MDC
Permanent-Magnet Synchronous Couplings - Disc Type
MDC series
couplings transmit torque from 18 lb-in (2 Nm) to
265 lb-in (30 Nm) on shafts from 0.25" (6 mm) to 1.125"
(28 mm).
Following an overload, these couplings disengage and slip, even
when used with a barrier, thus reducing the risk of damage to
connected equipment. |
MSV
Permanent-Magnet Synchronous Couplings - Cylindrical Type
MSV series
couplings transmit torque from 9 lb-in (1 Nm) to
1770 lb-in (200 Nm) on shafts from 0.125" (3 mm) to 2.6"
(65 mm). These barrier-type couplings -- which can be hermetically
sealed -- slip when overloaded, thus reducing the risk to connected
chemical pumps or other equipment. |
HKD
Permanent-Magnet Hysteresis Couplings - Collet Type
| HKD series
clutches transmit torque from 0.9 lb-in (0.1 Nm) to 22 lb-in
(2.5 Nm) on shafts from 0.125" (3 mm) to 1.0" (26
mm). Following an overload, the torque transmitted remains at
the rated torque level. The overload energy is converted into
heat which is safely dissipated. |
|
|
For dimensions and technical ratings, and/or mounting instructions,
follow the hyperlinks above or use the pull-down menu at the top
of the page.
If you’re not sure which product type best suits your unique
application, try our online selection
guide, or feel
free to contact our technical experts for assistance by filling
out our application assistance/inquiry
form.
All Rimtec couplings and
clutches can be custom designed to fit your application. New custom
designs are also available to meet your unique requirements.
|
About
Rimtec | Press
Release | Products | Selection
Guide
Ordering | Shows
| Contact Us | Terms
and Conditions | Home
Copyright © 1999-2004
Rimtec Corporation, 211 S. Lombard Road, Addison, IL 60101
Toll Free: 877-4RIMTEC (877-474-6832) ~ Phone: 630-628-0036
Fax: 630-628-0041 ~ Email: help@RimtecCorporation.com
Comments, questions or problems with our website? Please contact our webmaster.
|
